Is the 3m cable long enough do you think

Thinking of buying one of these and fitting it to the elbow bolt,any update on how this worked out

Just a update it’s ****ing here all day so u plugged the threaded hole with bolt Now it’s coming out the grommet 😂above the hole.., Will deffo get under her tomorrow with wire to unblock the outlet

No no sun roof,but I’m thinking it’s a run off for something else

Just a heads up that might help someone else I had water getting into passenger footwell carpet is soaking down the side.. I took off the side panel and found water coming in the small hole in the picture Hope this will solve my problems

Thanks everyone I didn’t pay for one with boost connection so it was sent in error… I’ll just blank it off this time,might fit gauge at later date after remap

Thanks for response,would a bit of hose and bolt do or is there a proper way of doing it

I’ve tried google but nothing on that connection I have on mine,every Egr blanking job done don’t have that connection that I have on mine

Bought this Egr blank for discovery 2 2003 td5,what do I need to connect to the top outlet,think it’s for a boost but can I blank it off or do I need to buy something else

That would be a life time job alright

Just want to fit 265/75/16 tyres on her so thinking 2” lift will help

I don’t I was going to put 2”+ springs on the front and try and keep air at the back

Feck it sounds easier to just put in springs

On how to get the frame out of the door ect

Thanks everyone for advise looking on utube there is very little on it