Tbh personally I’m not sure however it has been mentioned that timing being slightly off can prevent injectors firing

Another update. So I’ve fitted the new trigger wheel and a Bosch sensor that says is equivalent to part number LR000681 and I’ve fitted the correct later pulley. She still doesn’t start. I put the Noid Bulb back on the injector loom and no sign...

Exactly that. My pick up ring was a mess with multiple areas where the outer edge had chunks missing. I have the later style pulley and pick up ring and I think now I have the correct part number for the CPS

I don't think you can get the original. You have to replace it with the new one and changed pulley. I presume the OP asked for a timing ring for Freelander 2 and got what he asked for as it the only 1 available. Who ever sold it, didn't...

When I ordered the ring i did not realise the OE part was problematic and had been revised with a newer ring with no pressed in spacer.

Yes. But I’m assuming there are 2 part numbers. 1 for sensor appropriate to the original pick up ring and another one that must be slightly different as the newer pick up ring sits closer to the crank?

Was this mentioned "Febi is the correct crank sensor for an 07 FL2" ?

Ps now I have the updated tone ring and the later crank pulley does anyone have the correct part number for the relevant Crank position sensor to line up with the new tone ring? :)

Just a misunderstanding. In my head the crank pulley was the toothed sprocket. I now realise you were referring to the pulley that runs the auxillary belt. Yes the timing may have moved enough for a non start in theory. The reason I did all this...

You are definitely right to get the correct CPS setup installed. Don't be to surprised if it still doesn't fire the injectors though, as there are other things that can stop them. They are of course controlled by the ECU, so if the ECU isn't...

Good morning, So on your Advice I got a Noid light kit. This showed that the injectors are not firing so it must be the CPS. I have purchased the new trigger wheel and the later crank pulley. Does anyone know the part number for the Crank...

The auxiliary belt you say was removed is the crank pulley, therefore was removed the toothed pulley is the timing belt pulley so to speak.

This may be the issue then. I did not realise the ribbed pulley had a position as I thought it was the trigger pulley that caused the injector pulse?

w sorry long story short. I ordered a new pick up ring not realising the early one had a built in spacer where as the new one is thin. Fitting the new ring on the old pulley means nothing lines up so to get it working we made a spacer. I have...

Duff cam position sensor? Had a couple of these on my F1 TD4. No codes, the engine will crank, but not fire.

No, the crank pulley has not been off.

Hi folks. I’ve still got the same non start issue. I’ll provide an update of what we’ve tried. The pick up ring was badly worn with bits on the outside of the ring missing. I’ve got a new ring and we’ve temporarily made up a spacer so the new...