Hi, i have 2004 Freelander face lift model, and on the windscreen wiper lever the drizzle setting doesnt work, the one that controlls the timing.. i was wondering if there is some sort of relay to it or do i just have to buy a new lever?

yeah.. it was aftermarket controller..

to my knowledge i havent found any non-standard buttons or have i seen any signs that any were installed, to my knowledge i mean

I tried to Google the writing on the box and it did gave me cruise control boxes,so that must be it. But I don't have cruise control on the steering wheel

#

Hi, i have Freelander 1 facelift model from year 2004. its 1.8 petrol.. and i'm wondering what is the purpose of the electric box just above the break fluid reservoir? i dont have anything connected to it for now because i noticed that the cable going there has been burned from the connector...

Okey. But I was wondering how picky it is, cause I got oils changed couple of weeks ago, and they put syntax ls 75w-140 oil in the rear diff, I was just wondering if the noise is because of that? I phoned them and they will look up why they used that oil

Do you mean 80w-90 because I couldn't find a straight 80w? Is it how picky about that rear diff oil?

Hi, is there any specific oil you should use for the rear diff and in the IRD? I live in Finland, so temperatures change from +30 Celsius to - 30 Celsius.

I had a feeling that they might be the support bearings. I could change those and the oil.

Hi my fellow freelander lovers, I have a problem with my 2004, 1.8 petrol facelift freelander. It has started making a wierd noise, It sounds like some spinning/howling sound. It starts when you start moving, it's worst at 20-40km/h and starts stopping at 65-95km/h or I just don't hear it so...

Yeah, probaply. But I got a new props haft with the joint

Hi, car is now repaired. The broplem was the first cam shaft that went from IRD to VCU. The ball bearings were broken from the IRD side

https://www.lrparts.net/stc50413-freelander-1-soft-a-bar-manufactured-from-preformed-plastic-and-foam.html I bought this, but it's named stc7930

Dammit, I bought my self a bumber guard, or what it's name from a 1999 model, so money wasted I guess