I’m in the middle of on engine swap. D4 SDV6 with a knackered crank, I’ve sourced Jag XF 3.0 engine to fit. I’ve read the sy you need to strip it down to the block but do you also swap the injectors over? Thanks

so need to change the prop ujs on my 110. I ordered 4 from barry 4x4 but they are too wide. I measured my old one, which cap to cap is 75mm. Any one got a part number for these?

Bout half a tank of fuel

110 fuel gauge not working. This is in the middle of a rebuild. 12.3 v going into gauge, 6.4v out of gauge. 6.4v at tank. Reading zero all the time....

Having fitted a 200 tdi to my 110, I'm having bother mating a standard 110 200tdi exhaust to the front cast down pipe. I think after investigation that the cast pipe could well be from a discovery. I've removed it and seems to have the number HTC 2172 or 2572 or 2112 on the cast pipe (difficult...

i have this ignition barrel for a 110 I'm trying to rebuild. The connections are as follows. From the 12o clock position 1. Large connector 2. Small connector 5. Large connector 4. Small connector 3. Small connector 2. Small connector The cables I have are Large brown Large white Small white...

It's a 1986 but very much messed about. Pretty sure it's a later bulkhead and wiring to match!

New ignition switch, its marked as BATTERY ACC ST IGN as I removed this months ago I can't remember Which cable goes where. Any help always appreciated

Why? Because I bought it with a knackered engine and the 200 was available at the right price.

Sorry, this is a 1986 on a D plate. My mistake

Should say 1986, my mistake

The 200 tdi is from a defender not a discovery.

excuse my ignorance on this but I'm putting a200tdi into a 1996 2.5 n.a. 110. I believe that he engine mountings will be fine so will a off the shelf exhaust fit? Common sense says it will but.........

My mates a registered breaker, doesn't do land rovers normally but saw this on the copart website and bid on it for me. Cost without delivery was £900. The sum of the parts more than covers this. To be honest it wouldn't take much to put the 90 back on the road but due to it being a breaker...

http://s1345.photobucket.com/user/Chrisbaldmiesterwalker/media/Mobile%20Uploads/2016-12/9DF73917-C254-4C25-BFA5-861ABDD1E451_zpswwj2uggg.jpg.html