if I remember correctly the brake pedalswitch has two circuits one for the brake light and second circuit to switch off the cruise.

Silly question! But have you turned on the switch at the dash??? Kev

Just start at one end of the vehicle undoing anything going from the body to chassis. Take your time and you will be fine. You have pretty much done the rear end before. You will need someone to degas the air-conditioning, it's illegal to vent...

Cheers, will study the tube and see what I find. Ollie

There are bit and pieces on the University of Google, and the same on the collage of you tube! But. I think it will be slow and steady for you whilst you take her apart! The above will give you an idea! But as we all know! All are a bit...

Okay so sump off and check crankshaft for damage taking one main crank cap of at a time and then replacing they have stamped numbers on 1 to 5 the only one that was damaged was No 3 where the crank main bearings had spun but managed to get...

@D90mitch - Peterborough @Animal88 - St Ives @little1uk - Brampton The only ones that said Diagnostic? But! I don't think there on there anymore 😞 But they may have changed their profile 🤔 Kev

Thank you Don't wish to be pendantic or offend but did you read the original post? :) "Questions to the D2 Nanocom owning community: Is this the case that the cluster can be configured and if so, anyone close to PE28 that I can visit, swap cash...

PE28 is Peterborough, more or less.

East of Englandshire!! Ilford to Berwick on Tweed??? Without knowing closer! I could let you know who is possibly close to you?? On International Rescue?? Kev

I replaced mine..... London Turbos on ebay. https://www.ebay.co.uk/itm/321875788792

I take it no one has updated or changed their Turbo?? 🤔😱 Kev

a year older than mine and a few more miles,

Hi All, I'm looking at replacing my Garratt Turbo? So looking for comments and replies as to change the whole thing or cartridge replacement! And recommended makes/models? She is 26 years old, 200+ miles on clock, still strong ish!! So looking...

Where did you get the wrench?? 😂🤣

Mot fast approaching so booked in for Friday, so I replaced a damages front door, (Banged up) the welded up the rust on my front windscreen (Bad Winter), only to get the 3 amigos for the first time, which the lead me to get a used Nanocom, from a...