WOOOOOOHOOOOOOOO!!!! done!!!!! I manage to insert a 15 mm curved behind the tensioner and then used my home made 24mm and it tight the tensioner , came out easy breeeeezyyyy. YOU GUYS ARE JUST AMAZING!!!! THANK YOU ALL!!! ONEEEEEEE LAST QUESTION i know you might kill me but... I dont have the...

I think the main problem it will be to get that 15 on the back of the tensioner.

Tomorrow i will try that . Many thanks

Your are absolutly right!!! Mine already gave 4 turns and no tension release. Thats why i am here !! Any ideas

Ok. So im back to stage one. Before anything thank you for the help. So mine if i turn it anti-clockwise doesnt release what can i do !? 😞

Another thing that confuses me its the image below......So its not the 24 mmm. Making (on the picture) that the tensioner pulley.....

Correct, Thank you ... So that brings to my problem....it doesnt release the tension...it keeps turning.....

I thought about being clockwise....but if you see in the videos they all push towards the front of the car (anticlockwise) Its very.....very stiff when tryed clockwise. Thats why i ask the forum if i was doing something wrong. No matter what a tensioner needs to release and apply tension.....

ok... Let me see if i get it right . So i always need to have a wrench on the back , besides de 24mm?! Because if not. Its what happens my 24mm bolt spins without relasing tension!!?

Maybe im slow today Correct me if im wrong.... what i see here is a roller change , there is no belt already. How do you relase the tension to take the belt out???!! And if its like that-----How do you tension it back!!! Isnt srping operated?!!! I know is pre face lift ...

Hello its a facelift 2004, TD4 . M47 engine So if its like the photos you send , its not a tensioner but just a pulley...how does it release tension?

Hello to All!!! Well today was.....was the day to replace the crankshaft pulley . I had the wrench made for the tensioner all beautiful and perfect...... HUSTON WE HAVE A PROBLEM!!!! i try to undo the tensioner (anti clockwise) and it doesnt release the belt tension it moves like it undoing the...

I see what you guys mean . This clutch has been changed 39k ago. The mechanic show me the diferent parts of the gearbox where the oil could seat but there are always walls and they are sealed . There is not a chance for the fluid been pushed its to small ...and 1.5 ltrs inside would make the...

Yes all was checked the undertray is off. there is no evidence of oil. the engine is bone dry. Thats the big mystery . No oil inside our out. The only `dirt` was a rubber boot that had a cut ...on the oposite side for the gearbox and it was replaced.

Thats why its strange...There isnt any oil in the beelhousing they got inside there with a cam and there is no oil in it and no oil the breeders of the bellhousing. It was 1ltr and half i add in hte last months it should be filled with oil leaking it. But there is no oil. I dont think they...