Only work with sidelights and I think ignition on too.

Check inlet manifold and EGR for being clogged too. I had one EGR that caused a dead spot as pulling away. Blanking the vacuum to it removed the problem.

Share the error. Many others will have already and many will go on to make same mistake !!

Wheel arch liner out and dremel the nuts off the inside?? As above, keep heat down for sake of wing and guard.

Don't need headlights out to polish them ! Overkill. KV is talking about the guards.

Make sure plunger is free and springy before fitting. Insert switch so that the plunger goes through and sits on pedal stop. When seated flat and happy with plunger twist body to lock.

Ah. You didnt mention the guards !! Looks like nuts on rear ??

Hairdryer time and lens polish. Bulbs out, hairdryer in. Not difficult job. Don't handle the bulb glass faces.

Indeed. Worth getting fault codes read. Could be many things. Did AA read codes or guess ?

All Freelander 1 spares available (most of the time!) Also a good TD4 engine complete (still in vehicle) and a TD4 MOT failure to clear. Good engine, box (manual) and IRD. Rusted rear subframe. Please ask, got most stuff on the shelf. Can...

Sounds like cable moving the window up.and down has snapped and the CCU now doesn't know where the window glass is and so is bleeping. It might push down a bit by hand to enable you to shut the door. Pop inside door cover off, 4 screws and some...

Sounds like another loose connection. Check the engine bay fuse box where battery lead enters and the large fuse fixing screws.

Like I say, possible and a bit like delivering a calf through a letter box !!

BTW, I did a coolant pump without touching any mounts. Access through track rod slot in wheel arch. Fiddly but possible.

Just make sure that you don't sit the load on the plastic front wings where there is a gap under the top edge where the wing is bolted on. If you look.along the top of the wing you'll see what I mean. Freelander 1 that is.

For model year 2000 onwards, so vented discs, these are really good value. https://www.ebay.co.uk/itm/116056048951?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ClR2X1DmSLG&sssrc=4429486&ssuid=b5qQSb6hQNK&var=&widget_ver=artemis&media=COPY

Did this... In the 2003 TD4 ES

Done it. Like using the suede effect. Nice and thin and stretches. The best tip is only to glue about 12 inches, sorry 300mm at a time and take your time. Don't glue the edges until you are done and then the glue won't grab the fabric while...

So you actually wanted the pin out for your new double din unit that we have no clue what it is !! Bit more info next time. Thought it wasn't an HK unit in the photo !!

Don't understand the question. On circuits there is no orange / yellow but there is a pink / yellow which is a front speaker wire. What do you mean by reverse ?? Has it got reverse parking sounders ??