• AllanWorms
    AllanWorms replied to the thread Disco 4 (LR4) 2010 Disco LR4 with 5.0 and Misfire Codes.
    P0016, P0019: Crankshaft Position - Camshaft Position Correlation (likely Bank 1 and Bank 2) That's generally a pointer to the timing chain skipped. Its especially common on those early ones. I'd be vaery waring of running it... one more...
    Wednesday at 10:21
  • AllanWorms
    AllanWorms reacted to Stanleysteamer's post in the thread Spotlights - how to wire??? with Like Like.
    you'll find a wiring diag here.
    Wednesday at 08:50
  • AllanWorms
    AllanWorms reacted to Anaconda's post in the thread Spotlights - how to wire??? with Like Like.
    Bear in mind you might want a relay or two and a fuse before you burn your truck to the ground.
    Wednesday at 08:49
  • AllanWorms
    AllanWorms reacted to kermit_rr's post in the thread ignore thread please with Haha Haha.
    nothing, move along, nothing to see here
    Wednesday at 08:48
  • AllanWorms
    AllanWorms reacted to GrumpyGel's post in the thread ignore thread please with Haha Haha.
    Jeepers Ali, we've all got to ignore it all over again now.
    Wednesday at 08:47
  • AllanWorms
    AllanWorms reacted to kernowsvenski's post in the thread ignore thread please with Haha Haha.
    Last post five days ago! Looks like we're starting to get it! Well done chumps.
    Jun 22, 2025
  • AllanWorms
    AllanWorms reacted to daviesM's post in the thread Auto Gears Not engaging properly after front end jackup with Like Like.
    Thanks both, I had the wheel off yesterday and gave the drive shaft a pull and it was defo out, so gave it a good shove back in, heard the click and all was solid. Wheel back on, test drive and it's as though it never happened. Thanks for the...
    Jun 22, 2025
  • AllanWorms
    AllanWorms replied to the thread Flattery.
    I can't tell if you're talking about the Chinese version or JLR's new vehicles... ;) I'm VERY wary of the long term life of new Chinese cars... but no more wary than anything new from JLR, anyway.
    Jun 22, 2025
  • AllanWorms
    AllanWorms reacted to Bone9's post in the thread Bone's V8 Disco 2 Build Log with Like Like.
    Progress so far... Air box etc out of the way. Upper intake manifold off. Lower intake manifold, coil packs, fan, belts, pulleys, coolant hoses and rocker covers etc. Heads off. The problem cylinder, all liners look and feel ok for...
    Jun 18, 2025
  • AllanWorms
    AllanWorms reacted to Stanleysteamer's post in the thread Td5 engine oil with Haha Haha.
    But not in your engine, Right? don't want to give him the wrong idea! 🤣 🤣 🤣
    Jun 18, 2025
  • AllanWorms
    AllanWorms reacted to GrumpyGel's post in the thread ignore thread please with Haha Haha.
    I'm currently ignoring that my L Series keeps immobilising itself. We don't lock the car but both times I've got in it today the little LED on the dash has been blinking and goes solid when I turn the key, I have to press the fob unlock before...
    Jun 18, 2025
  • AllanWorms
    AllanWorms reacted to Mark Piercy's post in the thread Auto Gears Not engaging properly after front end jackup with Like Like.
    Dropped a drive shaft out maybe? 🤔
    Jun 18, 2025
  • AllanWorms
    AllanWorms reacted to Bemble's post in the thread Auto Gears Not engaging properly after front end jackup with Like Like.
    A crunching sound when moving the lever into Park is usually a sign of something disconnected downstream of the transmission output. It’s caused by the parking pawl ratcheting on the park lock gear, even though the park lock gear should be...
    Jun 18, 2025
  • AllanWorms
    AllanWorms reacted to cutlerr's post in the thread M57 classic conversion with Like Like.
    Tbh it is no bad thing. Letting the torque spin out protects the driveline to an extent The issue with the m57 is that it makes a lot of torque very low down I have put a pneumatic centre diff lock in but I doubt I will ever use it unless I get...
    Jun 18, 2025
  • AllanWorms
    AllanWorms replied to the thread M57 classic conversion.
    Disco 2's have traction control... The centre diff in the LT230 likes to destroy itself if it spins too fast/long :( If my Disco 1 wasn't such a ****box, I'd get Ashcroft ATBs front, centre and rear: Then it'd be like a proper AWD on the road...
    Jun 18, 2025
  • AllanWorms
    AllanWorms reacted to Grrrrrr's post in the thread M57 classic conversion with Like Like.
    No viscous coupling or traction control on the Disco? I guess limited slip diffs front and rear would help. Not sure how you'd manage the centre diff.
    Jun 18, 2025
  • AllanWorms
    AllanWorms replied to the thread M57 classic conversion.
    It'll be one very, very black line, with an LT230 🤣 All the power turns to smoke at the inside front wheel when accelerating on corners :( My Disco wears the front left twice as fast as all the other tyres, from lighting up when trying to pull...
    Jun 15, 2025
  • AllanWorms
    AllanWorms reacted to cutlerr's post in the thread M57 classic conversion with Like Like.
    Here she is
    Jun 15, 2025
  • AllanWorms
    AllanWorms reacted to saxavordian's post in the thread ignore thread please with Haha Haha.
    Lovely night in work in royal mail an area that noted for being a sweatbox😟 Only thing keeping me going was to ignore it. When all around you are speaking a foreign language I blank it. When I get back home to bed. I eventually ignored the din of...
    Jun 15, 2025
  • AllanWorms
    AllanWorms reacted to GrumpyGel's post in the thread ignore thread please with Haha Haha.
    I think this is your best cartoon to date. I think teacher would say "10 out of 10, keep up the good work". However...... Unless that was a spare pair, I speak for us all, when I say, thanks for not doing a full frontal on that one!
    Jun 15, 2025
  • AllanWorms
    AllanWorms reacted to backinblack's post in the thread ignore thread please with Haha Haha.
    Been away for a week so I'll start ignoring from today.
    Jun 15, 2025
  • AllanWorms
    AllanWorms reacted to GrumpyGel's post in the thread ignore thread please with Haha Haha.
    So do I ignore your post and notice the thread, or ignore the thread? I'm really confused now.
    Jun 15, 2025
  • AllanWorms
    AllanWorms reacted to saxavordian's post in the thread ignore thread please with Like Like.
    How could I ignore you on our first night together.
    Jun 15, 2025
  • AllanWorms
    AllanWorms reacted to Luke2025's post in the thread Disco 2 D2 Body burnt, friday 13th.. fml. with Sad Sad.
    Alright Guys, If you read my introduce me post, this is the burnt out D2… All my fault. I had a lapse in what I normally would do, I left a dirty greasy rag on the rear drivers axle and it caught fire from a bit of glue that was on fire from...
    Jun 15, 2025
  • AllanWorms
    AllanWorms reacted to pwood999's post in the thread ignore thread please with Like Like.
    But that one didn't tell us to ignore it . . . hence we actually did ignore it.
    Jun 13, 2025
  • AllanWorms
    AllanWorms reacted to Forrest Gump's post in the thread ignore thread please with Haha Haha.
    Just thought I’d be an annoying c🙂🙂t and keep this rolling 😎
    Jun 12, 2025
  • AllanWorms
    AllanWorms reacted to GrumpyGel's post in the thread ignore thread please with Haha Haha.
    Yes, I feel the OP has acted very irresponsibly in hyjacking a technical forum with his trash thread. He should hang his head in shame. However, I hope our mighty leader does not shift this thread to AG, as it will descend into AG level of...
    Jun 12, 2025
  • AllanWorms
    AllanWorms reacted to Freddie17's post in the thread ignore thread please with Haha Haha.
    Well, it is a bit liking posting on here with “don’t ask me how I know”…
    Jun 11, 2025
  • AllanWorms
    AllanWorms replied to the thread ignore thread please.
    It could end up being the longest running thread on the site...
    Jun 11, 2025
  • AllanWorms
    AllanWorms reacted to Forrest Gump's post in the thread ignore thread please with Like Like.
    This is probably going to end up with about a 1000 comments...the usual comedians seem to be here :)
    Jun 11, 2025
Show older items