• Alibro
    Alibro reacted to MaxTheDog1's post in the thread What have you done to your Freelander today with Like Like.
    Replaced OSR window regulator. Motor dead in the water. Been in since 2012 apparently. Anyway all done and working again.
    Jul 3, 2025
  • Alibro
    Alibro replied to the thread Advice on new engine for Freelander 1 petrol convertible.
    The diesel struggles off road without low range to get up steep hills so the petrol will be worse. For green laning or off road racing racing they are good but not so much for extreme off roading.
    Jul 3, 2025
  • Alibro
    Alibro replied to the thread Freelander 1 OR window kapput(not tailgate)..
    Well done. I don't think it's common for the original motors to fail but I can't comment on after market ones. I guess someone must have replaced the regulator and motor at the same time in the past. I have to admit I usually order a repair kit...
    Jul 3, 2025
  • Alibro
    Alibro replied to the thread ignore thread please.
    I was going great ignoring this thread, then today I couldn't help myself and here we are again! Sorry guys, my bad! 🙁
    Jul 1, 2025
  • Alibro
    Alibro replied to the thread VCU Torque test results.
    I often wondered where the 5kg option came from. It was always 8kg when I first did the test many years ago.
    Jun 28, 2025
  • Alibro
    Alibro reacted to andyfreelandy's post in the thread VCU Torque test results with Like Like.
    Off the car should be 1/3 of the time on the car. Due to the 3:1 diff gearing. So 1.2m and 5Kg on the car at a minute is at end of life. I use as a rule of thumb.
    Jun 28, 2025
  • Alibro
    Alibro reacted to MaxTheDog1's post in the thread Freelander 1 OR window kapput(not tailgate). with Like Like.
    Many thanks for that Ali.👍🏻
    Jun 28, 2025
  • Alibro
    Alibro replied to the thread Freelander 1 OR window kapput(not tailgate)..
    Jun 28, 2025
  • Alibro
    Alibro replied to the thread Freelander 1 OR window kapput(not tailgate)..
    The rear window regulators are the easiest to repair and there are videos on Youtube showing how.
    Jun 27, 2025
  • Alibro
    Alibro replied to the thread Front lower arm rear bush.
    The rear bushes are usually so hard to remove it's only worth doing if the arms are good. Replacement bushes will need pressing in unless you pay extra for the complete unit and this requires a press.
    Jun 27, 2025
  • Alibro
    Alibro replied to the thread Freelander 1 Possible TD4 HG Failure and overheated engine.
    So long as he's paying the bill just go with it. It's easier that way. ;)
    Jun 27, 2025
  • Alibro
    Alibro replied to the thread VCU Torque test results.
    I've never tried testing a VCU that way but it looks kinda tight to me. The scaffold weighs a kilo or two as well as the 6kg weight. In the past I've stuck screwdrivers through the UJ joints to turn a VCU but could never have applied the force...
    Jun 26, 2025
  • Alibro
    Alibro reacted to andyfreelandy's post in the thread Freelander 1 Headlining and Door Panel Replacement - completed with Like Like.
    Looks good. Had a shot at recovering tired door panels this afternoon. Looks to be quite a success.
    Jun 24, 2025
  • Alibro
    Alibro reacted to kernowsvenski's post in the thread What have you done to your Freelander today with Like Like.
    My old banger £200 daily driver runaround bmw failed the mot today with a knackered subframe. I had a good look at it and the whole rear suspension looks like it's been parked in the sea for some years, so sadly off to the scrappy it goes. It...
    Jun 20, 2025
  • Alibro
    Alibro replied to the thread Freelander 1 Freelander EV.
    And/Or the most bonkers! 🤣 Thanks mate :)
    Jun 19, 2025
  • Alibro
    Alibro replied to the thread Freelander 1 Freelander EV.
    I wouldn't mind so much but the charging timer was only installed a couple of months ago. :( At least it helps me remember how I installed everything in the first place. I spent a few hours rebuilding the HV junction box so it's almost complete...
    Jun 15, 2025
  • Alibro
    Alibro replied to the thread Freelander 1 Freelander EV.
    The rebuild has started. HV and LV junction boxes removed Dumped in a box I was never happy with the previous design that kinda evolved as I learned more about what I needed. I had LV components in the HV JB which is an obvious no no, and...
    • PXL_20250613_231003934.jpg
    • PXL_20250613_230946015.jpg
    Jun 15, 2025
  • Alibro
    Alibro replied to the thread What have you done to your Freelander today.
    Not sure whether we should laugh or cry.
    Jun 15, 2025
  • Alibro
    Alibro reacted to andyfreelandy's post in the thread What have you done to your Freelander today with Wow Wow.
    Not very often, fortunately, I get "one of those jobs" ! Offered to replace a strut top mount for a mate. Both strut to hub bolts and nuts seized solid, like they had become one piece of metal. My 350 + ft lb impact driver wouldn't touch it. Nut...
    Jun 15, 2025
  • Alibro
    Alibro reacted to saxavordian's post in the thread ignore thread please with Wow Wow.
    Lovely night in work in royal mail an area that noted for being a sweatbox😟 Only thing keeping me going was to ignore it. When all around you are speaking a foreign language I blank it. When I get back home to bed. I eventually ignored the din of...
    Jun 14, 2025
  • Alibro
    Alibro reacted to saxavordian's post in the thread ignore thread please with Haha Haha.
    I will leave you with this image of me getting ready for work tonight. Night night all.
    Jun 14, 2025
  • Alibro
    Alibro reacted to MGT's post in the thread ignore thread please with Haha Haha.
    -
    Jun 14, 2025
  • Alibro
    Alibro reacted to GrumpyGel's post in the thread ignore thread please with Wow Wow.
    One thing we will never, ever, be able to ignore in future, when we see 1 of your great illustrations, is the image of you creating it on your bed naked save for a pair of Y fronts and socks!
    Jun 14, 2025
  • Alibro
    Alibro reacted to saxavordian's post in the thread ignore thread please with Like Like.
    I'm happy to have Google do that for me for free. The more I advertising Landyzone, people who are searching for images can see where it came from. Books are old hat now as you may sell a dozen or none. Just keep ignoring me 🥸
    Jun 14, 2025
  • Alibro
    Alibro reacted to saxavordian's post in the thread ignore thread please with Like Like.
    How could I ignore you on our first night together.
    Jun 14, 2025
  • Alibro
    Alibro reacted to saxavordian's post in the thread ignore thread please with Like Like.
    I took the advice of many here and ignored it
    Jun 14, 2025
  • Alibro
    Alibro reacted to kernowsvenski's post in the thread ignore thread please with Like Like.
    Hi learned forum members. I wonder if you could help me with some advice. Sorry if this has been asked before but I've recently been reading this forum thread that says "please ignore". Now the problem is I've not ignored it and have only gone...
    Jun 14, 2025
  • Alibro
    Alibro reacted to Freddie17's post in the thread ignore thread please with Love Love.
    Just checking everyone is being, as usual, an upstanding and responsible adult within the community and ignoring this thread. @MGT See what you have done? There is real work not being done in the world right now because of you. A simple...
    Jun 14, 2025
  • Alibro
    Alibro reacted to kermit_rr's post in the thread ignore thread please with Like Like.
    To ignore something, by definition, you must know what to ignore. You can't ignore nothing
    Jun 14, 2025
  • Alibro
    Alibro reacted to MGT's post in the thread ignore thread please with Love Love.
    Thanks for ignoring this thread. I was afraid people would take the p*ss.
    Jun 14, 2025
Show older items