I have just had an issue with mine, I installed a new loom with bulb housinh attached. Alternator wasn't charging the battery. Figured out it was the charge light body grounding to the gauge cluster. Which caused the light not to go out. I am unsure if you are having a similar issue but try...

I've got standard 16x5.5 series wheels and 50/50 off road/ road use. I mostly only drive on the road to get somewhere like a green lane etc.

have you got any photos? The doors can be a right pain in the ass that is for sure

Hi all, As I am sure we are all aware getting a set of 7.5r16 tyres for a reasonable price is very difficult. I am looking at a few options 1. Michelin XZL which I have found for £170 per tyre 2. Changing to 235/85/16 which will cost approx £1400 for 5 with comforser AT tyres 3. hifly tral van...

Hi everyone, So... I had an issue with fuelling not long ago. Took off the fuel filter and checked the prime. Someone it the previous ownership had murdered the bleed screw on top of the filter. So I need a new filter housing, etc. In the process of removing the filter housing one of the fuel...

for hydraulic stuff I always try to go with delphi or something. Try to stay away from bp.

I am pretty clueless as to the name of the fittings. (I know what they look like) but I have no idea what are they called. Can you help?

Hi everyone, I am currently in the process of fixing the brakes on the series :/ I need two new brake pipes. I need the pipe that goes from the flexi to the top wheel cylinder and the pipe that goes from the top cylinder to the bottom cylinder. It is for the drivers side (RHD). The book says...

I can send you some photos of mine if you like?

If I was you I'd leave it as long as possible, the seal is probably ****ed. Is yours a 3 or 5 bearing? Sometimes you can get away with leaving it which is recommended. Replacing the seal is an expensive job and doesn't always even stop the leak lol. Also have you got the wading plug in? That...

What age side steps are you looking for? I have a set of 4 off a series 3 in mint condition ?

Didn't send it on that day however did send it more recently if you are interested there is some videos on my instagram @jeffrey_the_landy. Additionally if you are down for greenlaning at any time in Shropshire or North/Mid wales hmu I will be happy to join you so long as the old girl is...

Trying to find an oil leak, engine degrease. Hopefully haven't destroyed any seals :/ went a bit hard on the degreaser oops. But now when it leaks I should see where aha

Hi all, hoping to get out on the lanes this weekend. Would like to try Strata Florida. I have found this route online, anyone have any opinions? https://explore.osmaps.com/route/1224639/greenlaning--wales--strata-florida-to-machynlleth-green-lane let me know :)

Ok, done for tonight now, not alot of progress to be honest used jumper cables and wired in an engine to chassis ground. Still sparking less than before tho. I think the problem is with the positive side but I am unsure. When I put the multimeter on the throttle linkage to the ground and crank...