Does anyone have a wiring diagram for the rear wiper assembly for a P reg disco

I have got a 2nd hand one to replace the one I have but the wiring is different
My Haynes manual diagram looks to be for the replacement assembly with a 3 wires going to a connector and a few wires as an earth.

The assembly fitted has fittings for 2 plugs from the loom to fit (one by where the diode thing is and the other to the casing where the motor is)

Would like to see if I replace the knackered one with the one I bought.... Can't be that hard can it

dont know what year p reg is as we have a diffrent system here in ireland.
mine is a 1996 and has the 2 plug type the other one is the earler type.
i think you would be better off replacing like for like as the rear wiper is worked off the multi fuction unit and you might run into problems if you try mess around with the wireing.

Hi bomber, it makes me wonder what motor u have, the Haynes book shows both the 200 and 300 wiring diagrams, unfortunately u will have to prove the wiring of your replacement motor matches the same as your existing motor.
So with your multi-meter and both motors side by side u should hopefully be able to match wire for wire.