T

Terryhardy92

New Member

• Jan 17, 2022

• #1

Hi everyone im new to this forum and looking for any help.
Iv got a freelander 2 and I'm struggling to get to the bottom of why when I pull the stoke to trigger the front jets I trigger both the front and rear jets?
All the pressure goes to the rear jet and so only a trickle comes out of the front jets.
Any help would be appreciated.
Thanks in advance,
Terry

 

Nodge68

Well-Known Member

• Jan 17, 2022

• #2

Terryhardy92 said:

I pull the stoke to trigger the front jets I trigger both the front and rear jets?

Click to expand...

Pulling the stalk operates the rear washer.
The front is activated by pressing the button on the end of the same stalk.

 

T

Terryhardy92

New Member

• Jan 17, 2022

• #3

Nodge68 said:

Pulling the stalk operates the rear washer.
The front is activated by pressing the button on the end of the same stalk.

Click to expand...

What I meant was that when I trigger the front jets it also triggers the rear jet at the same time. Meaning I only want the front jets to work but both are? I'm assuming it's a faulty within the stalk?

 

Nodge68

Well-Known Member

• Jan 17, 2022

• #4

Possibly a faulty stalk, if the problem has only just occurred.