That's a 'flotation' size which is usually fitted to a 7.5J rim giving a tyre width of 251mm
It would have a nominal width of 241mm on a 6.5J rim.
As well as being overly wide even at 241 it's just too high overall.
It's about 3" bigger in diameter than the usual Freelander tyre.
You'll definitely need spacers to clear the spring cups on the front and perhaps the rears too.
I think this is just a tad too much.
Acceleration will be greatly reduced.
Your speedo will be wildy inaccurate too - difficult to say by exactly how much but I would expect that when the speedo was reading 60mph your true speed might be around 70ish.
You might also even have to do a bit of work with the tinsnips on the wheel-arches.
Overall I don't think these tyres are a good idea.