Beast o Bodmin
Banned
shall i see the scrapper if there is another one Ian?
it can be done, I've done it a couple of times but ages and ages ago - seem to remember that the selector housing on the depender is shorter but swapping one to the other works
tis to sort of job where it pays to dismantle them both side by side laying out the parts in a logical order in the hope that all will become clear at some point
tis to sort of job where it pays to dismantle them both side by side laying out the parts in a logical order in the hope that all will become clear at some point
iannotts
New Member
iannotts
New Member
Its a defender box i am after, cheers any way
Also need it back on the road asap, can see a late night ahead of me
Cheers,
What a lovely start to my holiday
do it in the garden, you might even gerra nice tan this weather
cheaper than costa del skeggy
iannotts
New Member
Got my box out and stripped down the fookin input shaft bearing is in a zillion pieces, so no point swapping it over to the disco box
the 1 gears set, one nearest the bell housing look worn but not chipped or missing teeth guess its has a lot of stick in first gear in its 213k life, rest of it looks fine.
the 1 gears set, one nearest the bell housing look worn but not chipped or missing teeth guess its has a lot of stick in first gear in its 213k life, rest of it looks fine.
iannotts
New Member
Just going to change the bearings and seals, if i get a new box that could be in a worse condiion than the one i have now.
At least i will have a know enterty if i rebuild this one.
