R

RUSTYCRUSTY

New Member
hi , new guy here, have a question, which landrover and rangerover gearboxes can i fit a pto to? i am not concerned with body or chassis problems. would be intending to fit a large-ish threephase generator.

also could anyone tell me what kind of power i could expect with a 2.5 turbo diesel, through the pto, in kwatts? or any units, even an educated guess?

particularly interested in range rover possibilities, and anyone that has done this on either a rangy or landy, or any help at all!!

cheers.
 
Theres a cover on the back of the 2.5 turbos' transfer box that comes off an you bolt the PTO on there, ant a clue about power an wot have you though.
 
shirley yer power output will be the same as power input less internal losses. so if yer static and not using any power to move the vehicle yule get the same as yer put in, ..
 
That is an excellent start thanks guys, so if it is on the transfer box, would that be fairly standard for all rang/landy of that time? what about auto`s is the transferbox the same?
oh and the plate on the transfer box, what does it look like?
cheers
 
here's a manky series one
 

Attachments

  • bf23_1.jpg
    bf23_1.jpg
    20.4 KB · Views: 815
You must log in or register to reply here.

Similar threads

N
Can I fit a Bulkhead in Position without Doors?
Replies
9
Views
2K
Rangieman123
Rangieman123
S
can i fit this on a series 3
Replies
9
Views
2K
boguing
boguing
G
48V Alternator run off the PTO to supply a big battery bank and inverter?
Replies
5
Views
2K
SteveMarquis
SteveMarquis
S
LAND ROVER DISCOVERY 3.0L 306DT I WANT TO FIT A GEN 1 ENGINE INTO A GEN 2
Replies
1
Views
1K
lynall
L
ChuggyFreelander
Freelander 1 New-to-me FL1 TD4 2006 - smoke on startup and doesn't get up to temp
2 3
Replies
44
Views
4K
Freddie17
Freddie17