ok, ok, I know what you lot are like. There's a wide variety of anatomically unpleasant places I could put it but I'm not going to go there!
I'm planning to fit a tank guard with a removable drop plate on it to my Disco, ('98 300tdi), so I've been giving some thought to the electrics. It occured to me that if the socket was mounted on the rear door, near the bottom to the left of the spare wheel as you look at it, then I wouldn't have to mess about making it detachable and all the wiring would be inside the vehicle.
Has anybody out there done this, any gotchas that I should know about before I start pulling the door trim off and set to drilling holes?
Ta.
I'm planning to fit a tank guard with a removable drop plate on it to my Disco, ('98 300tdi), so I've been giving some thought to the electrics. It occured to me that if the socket was mounted on the rear door, near the bottom to the left of the spare wheel as you look at it, then I wouldn't have to mess about making it detachable and all the wiring would be inside the vehicle.
Has anybody out there done this, any gotchas that I should know about before I start pulling the door trim off and set to drilling holes?
Ta.