taylorslandy72

Active Member

• Jan 3, 2015

• #1

Just another post on my wiring work, I've got a large bunch of wires coming through the bulkhead into the engine bay that feed lights, starter solenoid, alternator etc. am I best to add inline fuse to these, if so which ones? And what amp would that be? Thanks and hope you can help

 

Blackburn

Well-Known Member

• Jan 3, 2015

• #2

They should not need fuses.
Best improvement for headlights is to install a relay to feed the lights operated by the original headlight wiring this takes the stress off the column and dash switches.

 

trax

.

Events Planner

• Jan 3, 2015

• #3

wiring diag + fusebox work well.

 

oxides

Well-Known Member

• Jan 3, 2015

• #4

If the wiring is original it will have a few items that are fused - see the wiring diagram. Land Rover never seemed to believe in fuses (which might explain the number of bodged series wiring looms) but you can add some if you want. A couple of relays and a halogen headlight conversion won't upset the originality too much (if you're bothered) but it will let you see where you're going at night!