A

animatedsnail

New Member

• May 14, 2008

• #1

hi,

I'm just about to replace the seals on the rear hub after loosing oil. Its obviously lost oil looking at the state of my rear wheel so I was wondering whether I should put some new in?? Should I just use EP90 and re fill my rear axle or should I use something else and put it somewhere else??
Thanks,

Jon

 

Griffdowg

New Member

• May 14, 2008

• #2

which seal/seals are you replacing? if you tool everything off back to the stub axle and then removed that, ep90 from your axle should have poured out. which would neccessitate the draining of the remaining oil and replace with fresh. check the haynes for capacity. think its around 2.5-3litres for a rover axle.

G

 

A

animatedsnail

New Member

• May 14, 2008

• #3

I'm just replacing the hub seals, I think, they haven't arrived yet. I've booked myself some time away from the wife over the weekend!!

 

landy10

New Member

• May 14, 2008

• #4

animatedsnail said:

I've booked myself some time away from the wife over the weekend!!

Click to expand...

A necessary evil when you own a landy and its the summer