gog

Active Member

• Mar 9, 2011

• #1

fault up ,lights flashing ,then just all lit up .was wondering as my p38 has had air valves fitted to each air line can I just pump up affected corners and carry on driving.

 

dogsbody

Very senior member

• Mar 9, 2011

• #2

As long as you haven't got a leak in air bag or pipe work that's exactly what those valves are for. Pump the car up with the engine running to make sure that you fool the system into switching the compressor off. A constantly running compressor is a very short lived compressor. If you can't fool it into turning off you might want to disconnect the multiplug to save it.

 

Last edited: Mar 9, 2011

gog

Active Member

• Mar 9, 2011

• #3

Does the compressor continue to work once a fault is shown in car?
I know that you can't access any of the height settings when fault lights up.

 

robint

Well-Known Member

• Mar 9, 2011

• #4

i dont sopose you have the eas software or access to it it would solve the problem in 5 mins or should do if there is no major leaks in the system

 

gog

Active Member

• Mar 9, 2011

• #5

No got neither and so would have to drive to someone with ,
any one near Conwy N.Wales .

 

robint

Well-Known Member

• Mar 9, 2011

• #6

as a suggestion get one i think datatek on ere was doing a good deal well worth keeping your to far from me or i would do it for you

 

gog

Active Member

• Mar 9, 2011

• #7

Have put myself down for one with him,but in the meantime,,,,,,,,,

 

robint

Well-Known Member

• Mar 9, 2011

• #8

gog said:

Have put myself down for one with him,but in the meantime,,,,,,,,,

Click to expand...

i know mate sorry i cant offer you any more help