X

xrgas

New Member
Hi I have a problem with the flashers. The other day I stopped working, I changed the relay and solved. But today they have again broken. They do not work and stays on the trailer flasher light in the control instrument.
What can happen? You again relay is broken?
 
Last edited:
I had this problem and it turned out to be an earthing problem.

Edit: Do they work okay if you disconnect the trailer?
 
Okay, have you checked the fuse?
Check the wiring at the back of the indicators---they have a habit of coming off.
HAs the relay got wet?
Check to see that the wiring is not worn and rubbing on something and shorting out.
 
Hi, I check fuses, wiring but I don't find nothing.
4e6ehuhy.jpg


Here a photo of the problem.
5ege6y2e.jpg


I think the relay is broken again...
 
Ah! Would I be correct in saying that the indicators are not working, but the hazard lights are?

Have you checked the wiring at the rear? I'm talking about where the wiring comes down from the rear light socket?

I'm not good on the wiring and electricity stuff
 
the indicators don´t working, and the warning don´t working. But when close the card and the alarm is arming, make the three blinkers how indicated the alarm is armed.
Where is the wiring at the rear?
I think is possible a wiring problem, because I remember that the blinkers was broken when I turn to the right twice.

Thanks lorri789, and don´t worry, I´m the worst on the wiring electric stuff.
 
Hi again.

If you look under\behind the rear light on the right hand side as you are looking at it from the rear there should be a socket where the tow wiring connects. this often cracks away - I would look there. Follow the wiring from the socket on your tow bar.
 
Hi again!!

After a time, that the blinkers work fine, I have the same problem again. I think the problem is in the trailer wire pre-installatión, but I don´t find where is the problem, so I decided unpluggled the trailer´s wire on the relay. Is there any problem to do this?
By other hand here a photo of the old relay. It´s burned. How is it possible?
ck8b.jpg

9vc.jpg


Thanks
 
You must log in or register to reply here.

Similar threads

Acdadefender1
Indicators stopped working
Replies
7
Views
400
Acdadefender1
Acdadefender1
norseman
Classic hazards
Replies
8
Views
939
norseman
norseman
DefendingLancashire
Major leccy issues - everything dying when rolling off the power
Replies
4
Views
388
DefendingLancashire
DefendingLancashire
M
L322 L322 stuck in extended height
Replies
2
Views
459
Blob
Blob
8v_chris
P38A Heated Seats - my arse is cold!
Replies
10
Views
1K
Rubberknees
Rubberknees