J

Jukka

Guest
Hello.

I've been trying to figure out what line pull rating
my Tulsa 18G worm gear winch might have. Nowadays
it seems to be (according to web pages) a 20.000lbs
winch, but during WWII it was only a 10.000 winch.
Mine has mechanical fork like system (a sliding block
on the drive axle, looks bit like a butterfly with
wings spread) which engages the drive axle to the
reel.

Gearbox is round type like here:

http://www.chars-francais.net/kithobbyist/m3gmc1.htm

(see the last picture showing winch from upward)

Nowadays gearbox seems to have more square appearance:

http://www.ryanhyd.com/oldhtml/tulslow.htm

The winch has "18G" and a serial number stamped on
top of the gear housing. If it's original equipment
on my truck, then it should be from the sixties.

Does anybody know?

--
Jukka
 
You could have talked to a pro at Ryan - or emailed them. They have a toll
free and an email address right there on their page.
..
"Jukka" <hukkaportti@yahoo.com> wrote in message
news:3fc608ea.283413468@news.inet.fi...
> Hello.
>
> I've been trying to figure out what line pull rating
> my Tulsa 18G worm gear winch might have. Nowadays
> it seems to be (according to web pages) a 20.000lbs
> winch, but during WWII it was only a 10.000 winch.
> Mine has mechanical fork like system (a sliding block
> on the drive axle, looks bit like a butterfly with
> wings spread) which engages the drive axle to the
> reel.
>
> Gearbox is round type like here:
>
> http://www.chars-francais.net/kithobbyist/m3gmc1.htm
>
> (see the last picture showing winch from upward)
>
> Nowadays gearbox seems to have more square appearance:
>
> http://www.ryanhyd.com/oldhtml/tulslow.htm
>
> The winch has "18G" and a serial number stamped on
> top of the gear housing. If it's original equipment
> on my truck, then it should be from the sixties.
>
> Does anybody know?
>
> --
> Jukka



 
Thu, 27 Nov 2003 13:23:05 -0600 "George" <no.spam@no.spam.either.net>
wrote:

> You could have talked to a pro at Ryan - or emailed
> them. They have a toll
> free


Yes - must email 'em. Toll free, that must be from
the US, not overseas.

> and an email address right there on their page.


I'll try that, thanks.


--
Jukka
 

Similar threads