keefa

Member

• Feb 2, 2008

• #1

Hi.
how many seals should there be on the front doors of a 90 (1992)
Reason I ask is just picked up my landy with doors not closing very well. There is the normal door frame 'squashable' rubber seal as you'd expect around the door frame but there is also another seal 'glued' around the inside edge of the door.
should the extra sealing strip be on the door ?
Thanks chaps )

 

Pikey

Dummy Ejection Facilitator..

• Feb 2, 2008

• #2

That'll be the previous owners futile attempt to cure the leaks and stop the wetleg syndrome.

 

keefa

Member

• Feb 2, 2008

• #3

Ah ha !!!! Cheers for that. was wondering...glue?..Rover?...surly not ! hahaha.
removed the seal and doors shut now !!!
Also ordered new hinges etc and will 'lift' doors up etc as mentioned in previous posts, anything else I should look out for, how good should I be able to get the seal ? (not expecting submarine standard!! )
Cheers.

 

S

Sparky_Plug

New Member

• Feb 2, 2008

• #4

just fitted new seals to my 300 and sealed up the front bulkhead no water gets in now unless i go swiming altho with new seals u really have to slam the door 2 shut it untill the settle in abit

 

pussyeater

New Member

• Feb 4, 2008

• #5

Sparky_Plug said:

just fitted new seals to my 300 and sealed up the front bulkhead no water gets in now unless i go swiming altho with new seals u really have to slam the door 2 shut it untill the settle in abit

Click to expand...

Where did you get them from Spark? I could do with some on my 90.