MarkAnthony1986
New Member
I've seen the following Landy on eBay, does anyone have any ideas what might be the issue before I folk out 3K?
The description reads;
"This Land Rover came to us as a accident damage category D front end damage
We replaced drivers side wing, front bumper and headlight
Unfortunately it has the common discovery cold start problem in a morning
Takes 3 turns of the key before it will fire, once fired in a morning it will start all day with no problems until the next morning
Once its started in a morning the car runs faultless all day, you could evan leave it as is if you dont mine cranking it a couple of times in the morning
We have been chasing the problem for a while now, but are now out of time and ideas with it
We have replaced the usual common problems including
New injector seals, washers and O rings
Fuel filter housing on the back chassis
In tank fuel pump
Fuel regulator valve
The injectors have all been out and sent to our local diesel specialist to be checked
Cylinder head has been removed and sent to be pressure checked, we discovered it has a turner engineering cylinder head on which is a up rated £1200 cylinder head with thicker injector walls
We are now out of ideas and need the room back in the garage"
http://www.ebay.co.uk/itm/2004-Land...579028?hash=item43ec9de2d4:g:MpoAAOSw8RJXB7r5
Would you mind sharing your thoughts please?
The description reads;
"This Land Rover came to us as a accident damage category D front end damage
We replaced drivers side wing, front bumper and headlight
Unfortunately it has the common discovery cold start problem in a morning
Takes 3 turns of the key before it will fire, once fired in a morning it will start all day with no problems until the next morning
Once its started in a morning the car runs faultless all day, you could evan leave it as is if you dont mine cranking it a couple of times in the morning
We have been chasing the problem for a while now, but are now out of time and ideas with it
We have replaced the usual common problems including
New injector seals, washers and O rings
Fuel filter housing on the back chassis
In tank fuel pump
Fuel regulator valve
The injectors have all been out and sent to our local diesel specialist to be checked
Cylinder head has been removed and sent to be pressure checked, we discovered it has a turner engineering cylinder head on which is a up rated £1200 cylinder head with thicker injector walls
We are now out of ideas and need the room back in the garage"
http://www.ebay.co.uk/itm/2004-Land...579028?hash=item43ec9de2d4:g:MpoAAOSw8RJXB7r5
Would you mind sharing your thoughts please?