Mark Ormond

Active Member
Will Hawkey pick up a faulty FPR
my mate has broken down at home, i know hes had a leak on FPR
Any way it died on him i suspect injector seals or FPR
What might i expect hawkeye to show me any ideas
thanks
Mark
 
not a lot on the fuel side,why not pump also ,if you remove bung on bottom of filter with ignition on it should stream out smoothly
 
Last edited:
With the problems I've had I've found the best way is to disconnect the quick release parts at the fuel cooler and the feed to the fpr. Simply push the black end back and pull the hose.
Then start the pump into a container and see what comes out
 

Similar threads