does anyone know of anyone or any garage they would recomend to sort out the sunroofs on my 99 td5 i have read all the information on this subject but i think its beyond me i would like to use someone in the south/south midlands as i live in north oxfordshire i did find a chap advertising that he could repair them but hes in blackpool and i don't fancy a trip up there
Blackdogtrucker
Active Member
Whats wrong with it ??? is it leaking or not opening ??? if it`s like mine was leaking black silicon under the frame will fix that it`s easy to do just unclip the frame put a bead of silicon round the top refit the frame and clean all the seals well
Blackdogtrucker
Active Member
You are ment to drop the headlining which is a pig of a job . what you need is a helping hand to push the frame up from inside bit by bit you can get it to clear the roof enough to get the silicon in but not all at the same time
discool
Well-Known Member
As you have a D2 have a look at this link on what's all involved, just 14 screws once you get access, don't use the barthroom silicone it will won't last but use something like Silkaflex, but you will only need that if the body to sunroof seal is faulty.
Muddy-Tyres.net - - Discovery sunroof leak
Muddy-Tyres.net - - Discovery sunroof leak
thought it was mine!
New Member
could you use the sealant used on caravans its like a putty and doesnt set stays soft to compensate the movement whilst towing???
discool
Well-Known Member
I don't know the product but it has the same application as Silkaflex, caravans for one, so may be similar but in putty form, but be sure as you don't want to go near the sunroof again do u.
thought it was mine!
New Member
dont no the name of it i have to check shed did some work on caravan and told by stealer thats wat they used. its like a cream colour really easy to use and clean up.
discool
Well-Known Member
Either of the two seals could be faulty the glass one takes 15-20 mins to replace the other body to sunroof seal half a day or more.
A quick check that the mechanisim is pulling the glass down onto the rubber seal ie. there's still some grease on the slider and there's nothing in the way to stop it closing fully, you only need a millimetre cap to allow water through. I believe Vasaline on the rubber edge also helps sometimes.
