D

DennisD

New Member

• Mar 19, 2014

• #1

Hello, I've got an freelander 2 and it wont go in 4wd.
There some error codes in the systems which refer to the steering angle sensor.
The dealer already replaced the sensor whitout result.
Its still having the same errors.
U0126
U0148
U3003

When I look at live data the sensor is working ok in the steering module.
When I look in to the ABS there is no response.

Can you help whit this problem?

Thanks

 

Datatek

Well-Known Member

• Mar 19, 2014

• #2

What diagnostic kit was used? You need to identify what those fault codes mean.

 

D

DennisD

New Member

• Mar 20, 2014

• #3

Diagnostic kit is bosch kts 570
Explenation off codes:

U0126 No communication whit steering angle sensor
U0428 Steering angle sensor module
U3003 Battery voltage

gr

 

Optimus Prime

Well-Known Member

• Mar 20, 2014

• #4

would be looking at battery 1st, recall somewhere this fault can occur with a faulty battery (can't remember where)

might be worth a look on Freel2.com - Index

 

T

td4van

Well-Known Member

• Mar 23, 2014

• #5

U codes are not generally the root cause as they tend to be more "network" type codes then real codes signifying an issue and are generally reported by other modules not the source module.

I would advise that the issue is between the Steering angle sensor and the ABS module if you have no readings in the ABS from the steering angle sensor.