There should be an attachment to this post which shows the fitting instructions for a 300 Tdi Non-ABS Safari Snorkel.

My problem is that the air box on my 95 300 Tdi Discovery would appear to be different and certainly doesn't have a slot in the side to match the connecting pipe to.

Now it could be that I'm supposed to cut a hole in the airbox and thats fair enough but I'm beginning to think I should have a different airbox.

Also does anyone have a template I could borrow, for drilling all the holes in the wing as I got mine from ebay and the template was long gone.

Any ideas or assistance appreciated.

Cheers,
Steve