L

LR-hobbs

Active Member

• Yesterday at 21:04

• #1

Hello all
I'm looking into upgrades for my new P38, and was wondering if it's possible to fit the heated front screen to a non heated like we did in our old discovery 2.

I've checked the fuse box in the engine bay and both relays are missing, however there are wires going into the slots in the bottom of the fuse box.

Is this as simple as fit the relays , fit the switches , plug the screen in and get it programmed.

Or is this a pipe dream.

Cheers

 

kermit_rr

Very

Full Member

• Yesterday at 22:04

• #2

I thought so p38s had a heated screen!! Is there a space for the relays in the fusebox? What year is it? Do you have the button on the hvac?

 

L

LR-hobbs

Active Member

• Yesterday at 22:05

• #3

kermit_rr said:

I thought so p38s had a heated screen!! Is there a space for the relays in the fusebox? What year is it? Do you have the button on the hvac?

Click to expand...

Yes there are two spaces to fit the relays in the fuse box
It's a 1999 4.0
And no button on the HVAC

 

kermit_rr

Very

Full Member

• Yesterday at 22:07

• #4

Ok so you'll need a new hvac unit as a minimum.. unless you diy it

 

L

LR-hobbs

Active Member

• Yesterday at 22:27

• #5

kermit_rr said:

Ok so you'll need a new hvac unit as a minimum.. unless you diy it

Click to expand...

That should be easy enough, do you know where the wiring would be for the screen? Same place as the discovery 2?

 

kermit_rr

Very

Full Member

• Yesterday at 22:32

• #6

I don't know.. others will I'm sure

 

L

LR-hobbs

Active Member

• Yesterday at 22:59

• #7

kermit_rr said:

I don't know.. others will I'm sure

Click to expand...

no worries mate ,