M

Mr Rowland

New Member

• Feb 4, 2012

• #1

hi guys i have just ordered new air spring for rear of my p38 i have heard that you have to get all the air out of the springs, if so whats the best way any help would be grand

 

Datatek

Well-Known Member

• Feb 4, 2012

• #2

First off, they should always be fitted in pairs. PM me with an email address and I will send you guide to airbag replacment. It might be a good idea to have the EAS software and cable to hand in case of problems before you start.

 

TAKdriver

Active Member

• Feb 5, 2012

• #3

Mr Rowland said:

hi guys i have just ordered new air spring for rear of my p38 i have heard that you have to get all the air out of the springs, if so whats the best way any help would be grand

Click to expand...

I've been thinking about it for a while and will probably bedoing it within the next couple of months before I develop a hard problem.
Only advice I can give you is take Datateks advice : also get the software and cable from Data. He's been round the block on this one and is happy to help.