A

arc

Active Member

• Aug 25, 2009

• #1

The brackets on mine aren't too bad but the mounting holes are getting worn in an odd shape.

Have made up some plates to weld on but need to know what size to drill the hole.

The shock spigot is about 12mm but I'd guess the hole would need to be bigger to allow for articulation....... any suggestions?

 

tacr2man

Well-Known Member

• Aug 25, 2009

• #2

The outer diameter of the inner raised portion of the shock bush will give you the diameter of the hole required HTSH

 

A

arc

Active Member

• Aug 25, 2009

• #3

Oh yeah hadn't spotted that. That'll be 19mm then.

Cheers!