Martyfreelander

New Member
Hi all, am getting on with my freelander project and have found my offside rear brake pipe has been leaking fluid right near the fuel tank. I am going to make up my own pipes but would appreciate any advice as it looks like the fuel tank needs to be dropped to change them, are these front to rear pipes or is there a brake balancing valve or splitter at the rear? :confused:
 
Untitled.jpg


i think the to YA chassis are the same
 
as long as the flexi hoses than run to the cylinders are used and all joins are fail safe then you should be fine.
 

Similar threads