Have recently bought a rather ratty old 300tdi Discovery (1) auto with 12 months MOT for not a lot of money, but naturally it also came with a list of 'advisory' faults commensurate with its age.

Amongst these is a recommendation to replace the bushes on the radius arms and rear linkages where they connect to the chassis.

Question: Are these just a push-fit or do I need special tools to fit them?

I've read that if I replace them with Polybush equivalents then these are a much tighter fit than if I just use OEM bushes.

I also need to replace the rubber doughnut betwixt rear propshaft and diff but this looks straightforward enough a job.

oe bushes come as one piece that trailing arm just pushes through ,you need 17mm socket and spanner and 3omm socket and bar

Thanks James, got plenty of the right sized tools so will get them ordered.