martin1512

Well-Known Member

• Nov 3, 2012

• #1

Will a straight through mid section from a 200/300Tdi 110 fit a V8 110?
Mine is blowing and banging like buggery, so needs replacing. I would prefer straight through rather than one with a silencer as I like the noise, and I want to make best use of my engine mods.

 

jamesmartin

Well-Known Member

• Nov 3, 2012

• #2

not a straight fit but silencer from a tdi gives better noise than the proper one

 

Last edited: Nov 3, 2012

martin1512

Well-Known Member

• Nov 3, 2012

• #3

jamesmartin said:

not a straight fit but silence from a tdi gives better noise the the proper one

Click to expand...

Thank you James. What would I have to do to it to make it fit please?

 

jamesmartin

Well-Known Member

• Nov 3, 2012

• #4

i cut and weld the flanges

 

martin1512

Well-Known Member

• Nov 3, 2012

• #5

jamesmartin said:

i cut and weld the flanges

Click to expand...

Top man, thank you.

 

little1uk

Active Member

• Nov 3, 2012

• #6

Like most mods ya get under it and offer it up, do a measure then measure again, cut, weld, clean and ya done

 

martin1512

Well-Known Member

• Nov 3, 2012

• #7

little1uk said:

Like most mods ya get under it and offer it up, do a measure then measure again, cut, weld, clean and ya done

Click to expand...

I was hoping to get one made for the V8, but no one seems to do one. I have found for a Tdi, TD5 and Puma, but not for V8