ozzyboydeano
Well-Known Member
very good question
but i have no issues with the climate control on my td5 unless you have coolant blockage fuel cooler thermostat issues
KISSMYAURA
Well-Known Member
Why not fit a twin pipe exhaust through the cab, that will warm you up 
Seen this?
Seen this?
Last edited:
KISSMYAURA
Well-Known Member
Brace yourself, i understand the puma heaters blast yer shins with very hot air, so much so you can buy aftermarket deflectors to fix the problem lolClimate control? Please
Nothing wrong, heats up pretty quick, temp is good. Does its job.
Just wondering if the Puma one is better, more refined that the TD5 one
http://www.mudstuff.co.uk/mud-puma-heater-deflector.html
KISSMYAURA
Well-Known Member
I think i would prefer to work and refurb one on the bench (as opposed to taking my one out) then when I have cut myself to ribbons and am surrounded by knee deep bits of sheet metal pop it in.
KISSMYAURA
Well-Known Member
I think the puma matrix is a monster compared to the def one, its about twice the size and square, matrix and housing sit inside the puma cabin in the middle, not in engine bay I think.
I guess you could source an def uprated matrix as in the video, and look for a better spec fan....
bankz5152
Well-Known Member
Ahh oh really? So this is just the fan?
https://m.ebay.co.uk/itm/Land-Rover...636997?hash=item41d1f91805:g:kpsAAOSwIX1Z47mc
Marmaduke
Well-Known Member
KISSMYAURA
Well-Known Member
Yep thats just the fan, the rest is a bit of a monster, its sits in the middle under dash.
Attachments
KISSMYAURA
Well-Known Member
Now that is a good call and again you are mind reading again stop it , makes me nervous.
Options / ideas
1) fully variable control
2) stepped control 5-8 steps
Easy to do, just having a goosey at parts needed now, problem is i would really like to keep the control so thinking could either
A) have a three step motor instead of the two we have now
B) Get jiggy with the controls and create a few more steps
Options / ideas
1) fully variable control
2) stepped control 5-8 steps
Easy to do, just having a goosey at parts needed now, problem is i would really like to keep the control so thinking could either
A) have a three step motor instead of the two we have now
B) Get jiggy with the controls and create a few more steps
KISSMYAURA
Well-Known Member
I am also adamant I can find a better fan, not fast just more efficient with better bearings!
bankz5152
Well-Known Member
Thats what im thinking now! If my brothers 04 Fiesta can output good heat and a low, non ear melting speed then should be able to mod the TD5 system tk be a tad more refined.
KISSMYAURA
Well-Known Member
As I have a dog guard between me and the load space, I was trying to find a fridge curtain to fit inside for winter months.
You know the clear very thick plastic strips over the chilled stuff in shops, ideally don't want strips just want a bit i can velcro up across the dog guard in the winter, to warm me cab up quicker. can only find it in strips so far.
You know the clear very thick plastic strips over the chilled stuff in shops, ideally don't want strips just want a bit i can velcro up across the dog guard in the winter, to warm me cab up quicker. can only find it in strips so far.
KISSMYAURA
Well-Known Member
The fan switch we have is super simple, low setting is 12v through resistor, and then full bean is just 12v straight to motor.
could use something like this:
Attachments
KISSMYAURA
Well-Known Member
Have seen this super mod from dutch supplier?
its just a funky version of above box of tricks with slider instead of knob, i am tempted but its a bit pricy
https://shop.landreiziger.nl/modificatie/mods-in-a-box/elektronische-ventilator-aansturing.html
its just a funky version of above box of tricks with slider instead of knob, i am tempted but its a bit pricy
https://shop.landreiziger.nl/modificatie/mods-in-a-box/elektronische-ventilator-aansturing.html
KISSMYAURA
Well-Known Member
lol, I am going smoke leak test my cabin this year, just for fun but just got to find a smoke bomb !
