Oggo_90

Member

• Feb 13, 2019

• #1

currently own a discovery 4 2010 hse I have a problem at the minute with it slamming the front brakes on soon as I turn will drive ok in straight line.
Steering angle sensor was comming up so replaced it but still same problem? Don’t know if any of part of the vechile needs resetting?
Thanks

 

freelance

Well-Known Member

• Feb 14, 2019

• #2

Have you put in mud/ruts by mistake? It thinks one wheel is spinning, so trying to stop it

 

Oggo_90

Member

• Feb 14, 2019

• #3

freelance said:

Have you put in mud/ruts by mistake? It thinks one wheel is spinning, so trying to stop it

Click to expand...

No not that I’m aware of, sorry only know few things about cars, can u recognise the fault?

 

johnlad

Well-Known Member

• Feb 14, 2019

• #4

Steering angle sensor needs calibration

 

Oggo_90

Member

• Feb 14, 2019

• #5

johnlad said:

Steering angle sensor needs calibration

Click to expand...

Thank you will give it a try

 

Oggo_90

Member

• Feb 14, 2019

• #6

johnlad said:

Steering angle sensor needs calibration

Click to expand...

Been reset few times now, there is no reading coming from the sensor at all “0”

 

Oggo_90

Member

• Feb 14, 2019

• #7

new sensor fitted still saying the same, seems to lower the car own it’s own and turn traction off