OK, so now the weather is better I'm going to have to change the DMF as its getting worse.

So are these all the parts required?

Crankshaft Rear Spigot Bearing - STC2079 - £9.00 x1
Clutch Fork Roll Pins - FTC1692 - £0.49 x2
Dual Mass Fylwheel - 415006810 - £369.23 x1
Clutch Kit - 624213300 - £88.61 x1

All prices plus VAT.

Will I require a prop shaft removal tool?

I have some four large good 6 tonne axle stands, a large 3 tonne jack and a small jack, so I should be OK with that lot.

I'm also looking at a solution to get the gearbox/transfer box down and back up safely. Possibly a second hand transmission jack.

Unless anyone has one I can borrow.

Cheers Simon