canuck12

Member

• Jan 12, 2016

• #1

Hi everyone
Quick question has any one here changed the front clip from a pre facelift 2000 to a facelift i guess my question is will a face lift bumper and headlaps bolt into the same position as the preefacelift bumper and headlamps

 

freelance

Well-Known Member

• Jan 12, 2016

• #2

A couple of body seams need cutting otherwise it can all be fitted, and it has been done!!

 

canuck12

Member

• Jan 12, 2016

• #3

Ok thanks iv only had the vehicle for a few months and havnt done much research on it body wise been to busy reading about all the horror stories do you if i would only have to trim the bumper cover or is it the fenders thst need cuting would i need to relocate brakets as well problem is its my daily driver i can only spare a weekend to gwt it done

 

Nodge68

Well-Known Member

• Jan 12, 2016

• #4

The front bumper support beam needs moving forward 2 inches to support the deeper bumper. Some metal needs cutting out to allow for the slightly larger headlamps. And the wiring needs to be slightly modified due to the twin headlamp bulbs. Otherwise it's relatively easy to do. The front wings (fenders) are the same.