S

Silverdisco2004

New Member

• Today at 08:00

• #1

Morning all,

I have Power Fold mirrors on my disco 2 but having a problem with them,
On occasion, usually when its been hot for a few days they don't fully fold out, (always fold in) so was thinking of lubricating the pivot points.
Have had the glass out but no access to the pivot points.
I have looked but can't find anywhere that says how to access where i need in order to add some silicone grease.

Hope someone can help or direct me to where i need to be.

Thanks in advance

Andy Hull

 

sierrafery

Well-Known Member

• Today at 12:47

• #2

Hi, just a guess as ițve never had them but the only chance seems to be to remove them from the door and try from that side

 

S

Silverdisco2004

New Member

• Today at 12:49

• #3

Thanks fery,

i'll have a look as that's the only place i've not looked, it's just the pivot point is on the outside of the vehicle.

Thanks

Andy Hull

 

sierrafery

Well-Known Member

• Today at 12:56

• #4

Silverdisco2004 said:

it's just the pivot point is on the outside of the vehicle.

Click to expand...

That's why i suggested to remove them from the door completeley and insert a flexible spray nozzle through the holes you see if you can or drill some holes carefully though that plastic plate

 

marjon

Well-Known Member

Full Member

• Today at 13:05

• #5

Have you had a good look underneath to see if there are any Plug/access hole you could squirt in?

J

 

landowner

Pensioner Pete

Full Member

• Today at 14:44

• #6

marjon said:

Have you had a good look underneath to see if there are any Plug/access hole you could squirt in?

J

Click to expand...

Shouldn't this be in Top Totty