Universally_Challenged

Active Member

• Jan 25, 2010

• #1

could someone please have a quick look up of the part number for the air distribution servo on a 98 HsE

Staying with a friend and dont have my part cds.

thanks

 

Universally_Challenged

Active Member

• Jan 25, 2010

• #2

secondly, its the top one on the driver side rite?

 

Irishrover

Well-Known Member

• Jan 25, 2010

• #3

The set of 3 blend motors is STC 3259. I am not aware that they can be bought new as single items as they are all wired into one plug.
I know however that the cable can be cut and spliced into the existing wiring if only one motor is to be replaced.

 

TAKdriver

Active Member

• Jan 26, 2010

• #4

Where can I get the parts CD ?

 

DM68

Active Member

• Jan 26, 2010

• #5

You can get a single blend motor for that position part no#STC3259A but the cable is only about 5'' long, so will have to be either solder wires and heat shrink or connector blocked and insulated.Hope this helps.

 

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Forum Sponsor

• Jan 26, 2010

• #6

is that the grey green or blue one you need
think it's grey but not sure-but if it is you can have a brand new one from me.
EDIT I have 2 (W 961 785 P 16105510008 ) the tape only indicates the position should be same.

Reason is I have a one no longer own a range rover-So if you want one and I'm keeping one for my granddads peugeot as the gears are the same.

There is a catch, you either collect or pay the postage-you can have the part completely free if you like

 

Last edited: Jan 26, 2010