Hi all.
I have just fitted Parabolic springs to my series III with pro comp 3000 extended shocks.
she is listing to one side with a noticable inch to inch and a half diffrence, i have had a good look and all is in order as it should be.
could this be as simple as one of the springs tension is not as good as the other??? please help!

depending on the make the springs are handed make sure you have them the right way round. if this is right try doing up the shackles with someone sat in the drivers seat

Standard springs are definitely handed and they have a set up procedure where you have to set the axle to chassis distance before you tighten the bush bolts up. I would presume there's something similar with parabollox?