discomania
Well-Known Member
No you get them indeed, comes with seals and all sorts as well that you won't need until you rebuild your transfer box.
No you get them indeed, comes with seals and all sorts as well that you won't need until you rebuild your transfer box.
discomania
Well-Known Member
Before you do, look in the haynes manaul or workshop manual, and look at the torque specifications for things, also take into consideration your 200tdi engine, and get one that can cope with the high torques.
GRUNT
Well-Known Member
Haynes don't admit that the transfer box or gearbox have any user servicable items in them so don't give torque settings for the cover bolts. Have a look in the manual on the manual fred in this bit, it's in there somewhere. You can get gaskets for the plate but if thats all your doing to the transfer box then I'd get the kids to finish the coco-pops off and use the box.
Dopey_1983
New Member
Hi, I have had a look around and I still can't find what torque the cover bolts should be. I couldn't find the manual thread on here is it hard to find or am I just stupid!!
Dopey_1983
New Member
No Problem
GRUNT
Well-Known Member
http://www.landrover.ee/est/files/manuals/cars/defender/Def_90_110_WSM_book1.pdf
Page 4. 22-28Nm - 16-21lbft.
Page 4. 22-28Nm - 16-21lbft.
Dopey_1983
New Member
Thank you very much Grunt that is exactly what I was needing. Thanks very much
Dopey_1983
New Member
Sorry I kinda stole your thread but we both had the same problem I think.
