jagster0711

New Member

• Jun 11, 2019

• #1

Hi, I am about to change the front struts due to an airbag failing on the nearside front, after the bag failed the light on the height switch went off and the air suspension stopped working although the car is still up at the other three corners, What I wanted to ask is if the system should re-activate after I fit the new struts or will I need a tool to reset the system?
any advice is really appreciated

Thanks

David

 

brianp38dse

Well-Known Member

• Jun 11, 2019

• #2

welcome Aboard David
Best ask in the Range rover section there are some very knowledgeable people in there.
https://www.landyzone.co.uk/forum/range-rover.10/

 

jagster0711

New Member

• Jun 11, 2019

• #3

brianp38dse said:

welcome Aboard David
Best ask in the Range rover section there are some very knowledgeable people in there.
https://www.landyzone.co.uk/forum/range-rover.10/

Click to expand...

 

jagster0711

New Member

• Jun 11, 2019

• #4

Thanks, will do

 

RangeRoller dt

Well-Sprung Member

• Jun 12, 2019

• #5

Welcome to Landyzone

Look for RAVE, there is download in RR sections ‘tech section’. Will help a lot but is fuzzy on certain aspects.

 

biketeacherdave

Well-Known Member

• Jun 12, 2019

• #6

You will need diag to reset the hard fault ie no eas light displayed

 

jagster0711

New Member

• Jun 12, 2019

• #7

Hi Guys, Thanks for the info, just ordered an Allcomms from RSW.

 

RangeRoller dt

Well-Sprung Member

• Jun 12, 2019

• #8

They are good

 

Hippo

Lord Hippo

• Jun 13, 2019

• #9

Welcome to the forum