johnny curt 1

johnny curt 1

Well-Known Member
i just get her running right and she boots me in the balls again :mad::mad:

i noticed the foot brake was low effort so thinking it just needs the drums cleaning out so i took the beggars off put them in the lathe and skimmed bout 5 thou off the drum surfaces and roughed the shoe pads up a little with the emery cloth and noticed a shoe return spring hangin off one shoe from the top half :confused:

so being the smart arse i am i reattatched this spring to the opposite shoe so they both return over the slave cylinder

put the whole jobbie back together and tried the brakes wich just dropped right to the floor till the 2nd pump of the pedal so instantly fookin indicated to me the snail cams want adjusting a little

now its apparrant the snail cams are doing **** all :mad::boxing::wtf:

has anyone got any suggestions for this new conundrum :confused::confused:
 
Hi mate

what setup do you have std 10" or 11" on the front, have you by any chance turned them the wrong way and loosend them off instead of rotating them the right way to adjust them not telling you how to suck eggs like :)
 
make or buy new snail cam ,when we used to build new ones some were nearly or out of adjustment ,lr tolerances hey
 
i dunno wich way to turn them untill i strip the fekkers down again but i cant imagine what the snail cam sits against or how it holds the 2 shoes out equally as from what i remember from earlier today it looks like the snail sits against the inside of just one shoe or is there something missing that farmer giles before me has mertilised

more to the point why has this **** started just because i put a sodding spring back on between the two shoes when they worked perfectly without it :confused:
 
snail cam sits against post that spring secures too or similar depending on type ,are shoes wrong way round post only sits against cam properly the right way round
 
forgot to mention its the front axle ones with std 10" drums and the cam adjuster on the top front side of the backplate :)
 
Johnny, if you want I can go out to my man cave and remove a hub and take a photo for you, should take 10 to 15 mins, you want me to?
 
gonna have a reet bloody good fettle with these snail cams tomorrow and take a few piccies aswell as im sure i can make these bastids perfect

so here we fekkin go again ding ding .........rrroooouuuuunnnnnd 2 :boxing::boxing::5bsmash::5bsmash:
 
im gonna have to vanish fer a couple of hours here as its the wifes turn on the laptop now for a verry important facefook sesh :rolleyes:
 
wouldnt be the first time ive blobbed a lump of mig on the periphery of the snail cam,
to allow it to contact the shoe peg.
 
I guess the problem has arisen because the slave cylinder is now returning and being compressed by the spring. Where as before it was just staying out. Sounds like they just need adjustment. Jack up the front end. Turn the wheel while you turn the snail cam until the wheel locks up. Then back off one or two notches. I usually adjust mine so they drag very slightly. The drag goes in no time at all.
Sometimes it's hard to feel the notches if they're worn smooth. I filed lumps back into mine.
 
Locky1978 said:
I guess the problem has arisen because the slave cylinder is now returning and being compressed by the spring. Where as before it was just staying out. Sounds like they just need adjustment. Jack up the front end. Turn the wheel while you turn the snail cam until the wheel locks up. Then back off one or two notches. I usually adjust mine so they drag very slightly. The drag goes in no time at all.
Sometimes it's hard to feel the notches if they're worn smooth. I filed lumps back into mine.
Click to expand...
i welded lumps back into mine :rolleyes:
 
johnny curt 1 said:
im gonna have to vanish fer a couple of hours here as its the wifes turn on the laptop now for a verry important facefook sesh :rolleyes:
Click to expand...

Good opportunity to grab your torch and spanners then :D
Shouldn't take you more than an hour to sort leaving you an hour for a fag and brew after.
 
You must log in or register to reply here.

Similar threads

Paxmanmerv
These brakes have got me scratchiung my head..
2
Replies
25
Views
4K
Tall Ratbag
T
C
Help with brakes
Replies
8
Views
1K
c0w3h
C
davidpurton
Brakes binding..
Replies
16
Views
3K
steve2286w
steve2286w
F
£300 Freelander project! ... my first ever Land Rover
2 3
Replies
44
Views
5K
pwood999
pwood999
M
Freelander 1 Advice please
Replies
8
Views
1K
pwood999
pwood999