illy

illy

Active Member
Adoo chaps, my clutch pedal has gone very low and im told you cant bleed them, is this the case, if you fit a new master cylinder surly it would need bleeding.:confused:

illy
 
it's a sealed sytem so won't need bleeding.

my guess is your slave cylinder has slipped on it's mounts and just requires utching back ;)
 
You can bleed them. There is a bleed valve on the slave. Same principal as brakes, nipple open, pedal down, close nipple, pedal up and repeat until no more air.
Did it go suddenly or over time? Could be the fork punched through :(
 
quattro6999 said:
You can bleed them. There is a bleed valve on the slave. Same principal as brakes, nipple open, pedal down, close nipple, pedal up and repeat until no more air.
Did it go suddenly or over time? Could be the fork punched through :(
Click to expand...

If it's a 1.8 or L series, it's a sealed cassette system. The whole assembly is a sealed unit. ;)
 
illy said:
Sorry its a td4

illy
Click to expand...

you can bleed it and m/c is replaceable its has a join above gear box you have to push collets in then pull pipe out, if its leaking fluid out of bell housing youll need slave as well but means gear box out,usually if slaves good after fitting master a couple of pumps should see it bled without touching bleed nipple
 
Last edited:
You must log in or register to reply here.

Similar threads

Cyrus 200
Clutch pedal on the floor
Replies
5
Views
968
MaxTheDog1
MaxTheDog1
P
Freelander 1 td4 2006 clutch master cylinder.
Replies
6
Views
822
pdpjpr
P
Cyrus 200
Clutch pedal
2
Replies
30
Views
2K
Alibro
Alibro
C
Help please problem bleeding 110 with ABS new brake master cylinder
Replies
3
Views
808
Civeng
C
D
Freelander 1 FL1 td4 clutch pedal dropped to floor - master or slave
Replies
4
Views
2K
Disco Magic
D