[JP]

New Member

• Oct 27, 2011

• #1

guess im lucky!!

since I've bought my 90 I havent bothered with the cambelt, previous owner didnt know when it was done either.. so I just been driving it as it is.

after my crusade this summer getting it all sorted, welded, waxoyled and new suspension I decided to get the cambelt done.

as its something crucial, I gave it to my mate who's a LR guru to get it done, as if I do it I'll keep worrying if I've done it properly.

he just called me saying I was lucky, he got the casing out and the whole thing is caked in mud, there's bits coming off the belt and the rollers are all shot!

I always use wadding plugs, so I guess this has been like that since the last owner had..

lucky! very lucky!!
going to stop over later today and get some pics of it

 

livers

Well-Known Member

• Oct 27, 2011

• #2

[JP];1664996 said:

I always use wadding plugs

Click to expand...

Thats where you have been going wrong

 

big si

Well-Known Member

• Oct 27, 2011

• #3

that's good timing mate ,very fortunate to catch it before it went ,I keep putting off doing mine as when i put the 200 lump in me 90 i was flat broke, must get it done soon though,

 

[JP]

New Member

• Oct 27, 2011

• #4

livers said:

Thats where you have been going wrong

Click to expand...

I know! havent got round to fit the breather yet! i understand that if the plug is there, the casing has no where to "breath" when hit by cold water, so it sucks water through the gaskets....

the breather allows for when it needs to breath, there's a clean run of pipe to suck air from....

 

Suffolkandgood

New Member

• Oct 27, 2011

• #5

Good shout, my belt needs doing soon!

 

easye1

Banned

• Oct 27, 2011

• #6

CoupeUK said:

Good shout, my belt needs doing soon!

Click to expand...

*
npw wish I`d said that last year when i was under my disco welding it, and stuff....
was on sorn for a year after too...
oh well.....
when it stops bloody raining, I just may be interested enough to get out and do some more to see if i`ve buggered the top end...:doh:

 

[JP]

New Member

• Oct 27, 2011

• #7

need new water pump too, mine is wobbling all over the place and the bearings are completly shot!!

 

easye1

Banned

• Oct 27, 2011

• #8

nice pic JP, but I noticed the difference twixt your an mine was I had a stud in the very top hole above the cam drive..
took me 2 days to get cover off without breaking it!

 

[JP]

New Member

• Oct 27, 2011

• #9

yep.... took 4h and a lot of heat to get that one out, it goes right into the head..the nut was seized solid and the hole stud had to come out!

luckly it didnt snap!