awkwardbob · Jan 21, 2021

Hi,

min no what is likely the latest in a series of daft questions, could anyone explain where I might expect to find the Glovebox strut ?

If there is one in our P38, then it certainly doesn’t work, the box flops open unceremoniously.

I thought I’d have a poke around to check the state of the strut and I can’t even find the blinking thing.

From what I’ve read it sounds like the retaining bracket is a common failure so I wonder if it’s just been completely removed.

Would be very grateful for any enlightenment !

Thanks

Bob

brianp38dse · Jan 21, 2021

No strut that i know off you press the button and it just comes down.
got me thinking now

Henry_b · Jan 21, 2021

There is a strut in behind pics below

The glovebox shouldn't just fly open it should gradually drop, mine used to drop and hit te floor, due to the brass inserts breaking free from the glove box

You can just about see it in these pics..

It is secured to the back of the glove box with 2 screws, 2 brass inserts sit in the plastic below

I drilled straight through the box and used a torx bolt to hold it, I had to tap it too!

Fixed!

The centre console lit should also spring up when you press the button

awkwardbob · Jan 21, 2021

Henry_b said:
There is a strut in behind pics below

The glovebox shouldn't just fly open it should gradually drop, mine used to drop and hit te floor, due to the brass inserts breaking free from the glove box

You can just about see it in these pics..

It is secured to the back of the glove box with 2 screws, 2 brass inserts sit in the plastic below

I drilled straight through the box and used a torx bolt to hold it, I had to tap it too!

Fixed!

The centre console lit should also spring up when you press the button

Thank you so much, that’s really helpful.

I’ll have a look tomorrow, mine lacks any grace. Oh and the centre console is floppy too so that’s on the list as well !

dubbleRR · Jan 21, 2021

Island 4x4 sells them ...£22.50 +vat ....But caravan door struts are near the same size for £12.00 quid or so ,,,,,,Just saying

awkwardbob · Jan 21, 2021

Oh, one thing, how did you get the box so far open in the second pic ?

mine doesn’t open that far... I have had deeper access but only by removing the three screws above

Henry_b · Jan 21, 2021

awkwardbob said:
Oh, one thing, how did you get the box so far open in the second pic ?

mine doesn’t open that far... I have had deeper access but only by removing the three screws above

It was broken thats why it opened so far

You have to take the plastic support structure off to remove the strut off the box, if yours isn't broken like mine

A few screws

awkwardbob · Jan 21, 2021

Henry_b said:
It was broken thats why it opened so far

You have to take the plastic support structure off to remove the strut off the box, if yours isn't broken like mine

A few screws

Great, that makes sense !
Thank you so much

brianp38dse · Jan 22, 2021

Thats a job to add to the list thanks Henry

Rubberknees · Jan 22, 2021

Didn't I read somewhere always check opener button works before screwing back in place or there could be problems.

Henry_b · Jan 22, 2021

brianp38dse said:
Thats a job to add to the list thanks Henry

It is amazing having a working strut in there, it stops it smaking your passengers on the knee when its opened

Having one on the centre console cubby is nice too, it just springs up

brianp38dse · Jan 22, 2021

Just been out and checked for the strut yes its there, no it dont work any more, no strut on the early models cubby box unless its fitted to the flip over drinks ones.

Grrrrrr · Jan 22, 2021

Rubberknees said:
Didn't I read somewhere always check opener button works before screwing back in place or there could be problems.

That rings a bell. I seem to recall an issue when @MrGorsky was fiddling with his. Cannot remember how we got around it after it happened either!

brianp38dse · Jan 22, 2021

Grrrrrr said:
That rings a bell. I seem to recall an issue when @MrGorsky was fiddling with his. Cannot remember how we got around it after it happened either!

I had the same years ago ended up unbolting the hinges at the bottom to then drop the top out

marjon · Jan 22, 2021

Cubby box with cup holder has a strut.

j

RangeRoller dt · Jan 22, 2021

Trust you!

Enery is right. The brass inserts you need to concern yourself with they are a PITA. Other thing to watch is what I did. Forgot to preload the open-button mechanism before putting it together so effectively superlocked myself out of the glove box. Only option was to break in which causes slight damage however careful you are.

pete12345 · Jan 22, 2021

Easy to take apart pig to re assemble

marjon · Jan 22, 2021

RangeRoller dt said:
Trust you!
.

Who??? Me

J

awkwardbob

Well-Known Member

brianp38dse

Well-Known Member

Henry_b

Think outside, no box required.

awkwardbob

Well-Known Member

dubbleRR

Well-Known Member

awkwardbob

Well-Known Member

Henry_b

Think outside, no box required.

awkwardbob

Well-Known Member

brianp38dse

Well-Known Member

Rubberknees

Well-Known Member

Henry_b

Think outside, no box required.

brianp38dse

Well-Known Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

brianp38dse

Well-Known Member

marjon

Well-Known Member

RangeRoller dt

Well-Sprung Member

pete12345

Well-Known Member

marjon

Well-Known Member

Similar threads