I just took my 300 block in to be tanked and bored. The guy at the machine
shop says that the block isnt worn enough to need boring. Just a hone and
piston knurling should be good enough. I've seen knurled valve guides, but
a knurled piston ?OK, thats a new one on me. Is this a good thing or should
I insist on reboring and not play with pistons with over 100,000 miles on
them ?? Thoughts ?? Thanks for your time

John

"John M. Wright" <johnmwright@access4less.net> wrote in message
news:10qeo825n2f1je5@corp.supernews.com...
>I just took my 300 block in to be tanked and bored. The guy at the machine
> shop says that the block isnt worn enough to need boring. Just a hone and
> piston knurling should be good enough. I've seen knurled valve guides,
> but
> a knurled piston ?OK, thats a new one on me. Is this a good thing or
> should
> I insist on reboring and not play with pistons with over 100,000 miles on
> them ?? Thoughts ?? Thanks for your time
>
> John
>
>

Google reveals all you need to know

toy

OLD time way to resize the piston so it fits better. I would just bore
it and use new pistons, rings.
Much better and will last much longer than knurling.

--
Steve Williams
Near Cooperstown NY


"John M. Wright" <johnmwright@access4less.net> wrote in message
news:10qeo825n2f1je5@corp.supernews.com...
> I just took my 300 block in to be tanked and bored. The guy at the
machine
> shop says that the block isnt worn enough to need boring. Just a hone
and
> piston knurling should be good enough. I've seen knurled valve
guides, but
> a knurled piston ?OK, thats a new one on me. Is this a good thing or
should
> I insist on reboring and not play with pistons with over 100,000 miles
on
> them ?? Thoughts ?? Thanks for your time
>
> John
>
>
>




----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! >100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---

Yes: you can knurl a piston.
No: it is not usually done, but sometimes it helps. However, for an
engine that is expected to have a long life, knurling the pistion is
not the best idea.
No: if it is not worn, do not rebore the block!
Yes: do hone the cylinders (you can do this yourself if you want)

On Fri, 26 Nov 2004 09:02:30 -0800, "John M. Wright"
<johnmwright@access4less.net> wrote:

>I just took my 300 block in to be tanked and bored. The guy at the machine
>shop says that the block isnt worn enough to need boring. Just a hone and
>piston knurling should be good enough. I've seen knurled valve guides, but
>a knurled piston ?OK, thats a new one on me. Is this a good thing or should
>I insist on reboring and not play with pistons with over 100,000 miles on
>them ?? Thoughts ?? Thanks for your time
>
>John
>