Chrisfrain2007
Active Member
Just having a thought, anybody made a winch bumper that's hidden? Iv seen the ones from rr-evolution and the original landy ones but they just look huge
gfromleeds
Well-Known Member
i saw an australian web site once were someone had done it! he even showed step by step pics, it looked good with just a hook hanging out the grill under the reg plate but cant for the life of me remember the address it involved a hole heap of cutting and welding though
Chrisfrain2007
Active Member
Exactly like that, 
, what winch is that? The biggest problem I see is getting a winch that's capable enough but small
, what winch is that? The biggest problem I see is getting a winch that's capable enough but small
Chrisfrain2007
Active Member
And not a bad idea dopey, maybe Il make 2
Dopey
Well-Known Member
Have a look see
essai Range Rover P38 : la méthode Suisse - journal du 4x4
essai Range Rover P38 : la méthode Suisse - journal du 4x4
Chrisfrain2007
Active Member
U can buy the second one dopes, that p38 is well sorted, I just want a few subtle mods
gfromleeds
Well-Known Member
thats the same kit but the one i saw it on, was a white rangie
must be an off the shelf item somwere
SpudH
Well-Known Member
No, I made that one myself from scrap iron. The winch is a cheap and nasty item from China. It has a 4000lb capacity when used with a single pulley which is only just barely adequate. If you plan any serious off roading 8,000lb is the minimum required for a rangie. Having said that, its done all I've asked off it so far but ireckon there is room for a genuine 4,000lb winch with my set up, the biggest issue is the fairlead roller set up. This needs to be low on the winch to keep things simple. The best set up I've seen since is a dismountable one. I'm away from my computer for a few days but will post a link when I get back
