timtheenchanteruk
Well-Known Member
regular changes with cheap oil is far better than leaving it longer with expensive stuff, it aint a hi tec engine, dont put hitec oil in it 
AlbertDefender90
Active Member
I just use any 15w40 tractor/heavy duty engine oil we have lying around. Anything around the same spec will do the job. The difference between cheap and expensive oil is the cheap stuff doesn't have as many additives so is best to change it more regular. Don't go near the really cheap oil as it is quite often full of ****. I've seen this both on the farm and at work and its not worth the risk.
Are you doing all the fluids, transfer box, gearbox and axels?
We bought a 1989 2.5TD in March and did the lot. The knowledgeable ones on here said run it 3000miles and then do the oil plus filter again then back on every 5-6k
We also have just discovered putting 2 stroke oil in with the diesel at a ratio of 250-1. It works a treat, gives it more low end torque, hardly any smoke on start up and the engine is quieter.
All the best and happy motoring.
the_wolf
Well-Known Member
I've heard of using 2 stroke before and wouldn't mind giving it a go but how much should I be using? In layman's terms, I can't do ratios. For instance how much should I add to say 40 litres of diesel
lofty69
Active Member
would it not just be 40 / 250 ?
Gives you 0.16 of a litre. so maybe round up to 200ml?
