A

Amyp

New Member

• Nov 2, 2012

• #1

Hi

I'm a newbie and joined in the hope that someone can help.

I have a defender 90 52 plate. For a few months I've had a battle with indicators. I've become an expert at changing fuses. We have replaced flasher unit twice - keeps burning out. My dad is a mechanic. Checked everything and to get to the flasher unit is a right pain! He is also stumped. Indicators go, then hazards go.

Any advice greatly appreciated as its my everyday truck and no indicators at night is a bit scary!

Thanks Amy

 

DiscoPol

Well-Known Member

• Nov 2, 2012

• #2

Amy,

quick word of advice, head over to the intro section and post a little intro in there, usually newbies that just start with problems get short shrift, now being female may help here but dont bet on it.

nobody likes a 1PW.

 

A

Amyp

New Member

• Nov 2, 2012

• #3

Thanks for your help!!

 

A

Amyp

New Member

• Nov 2, 2012

• #4

Heard if could be the hazard switch? Anyone had luck with this?

 

DEFENDER90-DAZ

New Member

• Nov 2, 2012

• #5

Read this: Hazard Switch & Indicators - fault diagnosis - Defender Forum - LR4x4 - The Land Rover Forum

Daz

 

A

Amyp

New Member

• Nov 2, 2012

• #6

Thanks daz for the helpful advice

 

DEFENDER90-DAZ

New Member

• Nov 2, 2012

• #7

No problem - let us all know how you get on with fixing it!

Daz

 

DEFENDER90-DAZ

New Member

• Nov 2, 2012

• #8

Might be an idea to put your 'general location' in your profile - someone might live close and offer to help

Daz

 

A

Amyp

New Member

• Nov 2, 2012

• #9

My dad has landys and is a mechanic so he can fix it. We were just a bit stumped as to what it could be. Switch ordered, wires bring checked as we speak.

Thanks

 

A

Amyp

New Member

• Nov 18, 2012

• #10

Sorted thanks. Wasn't the hazards but replaced rear loom and all ok now